トップ調べ方案内科学技術・医学専門資料規格>ISO Handbook "Paints and varnishes" の収載規格一覧

ISO Handbook "Paints and varnishes" の収載規格一覧

ISO Handbook "Paints and varnishes"国立国会図書館の所蔵情報へのリンク(Forth edition International Organization for Standardization 2012 【当館請求記号:M361-B451】)は4巻組の資料であり、各巻に収載されているISO規格は以下のとおりです。

目次

v. 1, pt. 1. General test methods
v. 1, pt. 2. General test methods
v. 2. Raw materials
v. 3. Preparation and protection of steel substrates

 

v. 1, pt. 1. General test methods

ISO 1513:2010 Paints and varnishes - Examination and preparation of test examples
ISO 1514:2004 Paints and varnishes - Standard panels for testing
ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method
ISO 1518-1:2011 Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method
ISO 1518-2:2011 Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method
ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 1520:2006 Paints and varnishes - Cupping test
ISO 1522:2006 Paints and varnishes - Pendulum damping test
ISO 1523:2002 Determination of flash point - Closed cup equilibrium method
ISO 1524:2000 Paints and varnishes and printing inks - Determination of fineness of grind
ISO 2409:2007 Paints and varnishes - Cross-cut test
ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups
ISO 2592:2000 Determination of flash and fire points - Cleveland open cup method
ISO 2719:2002 Determination of flash point - Pensky-Martens closed cup method
ISO 2808:2007 Paints and varnishes - Determination of film thickness
ISO 2810:2004 Paints and varnishes - Natural weathering of coatings - Exposure and assessment
ISO 2811-1:2011 Paints and varnishes - Determination of density - Part 1: Pyknometer method
ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method
ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method
ISO 2812-1:2007 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 2812-2:2007 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method
ISO 2812-3:2007 Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4:2007 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
ISO 2812-5:2007 Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
ISO 2813:1994 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
ISO 2813:1994/Cor 1:1997 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°
ISO 2814:1973 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
ISO 2815:2003 Paints and varnishes - Buchholz indentation test
ISO 2884-1:1999 Paints and varnishes - Determination of viscosity using rotational
viscometers - Part 1: Cone-andplate viscometer operated at a high rate of shear
ISO 2884-2:2003 Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed
ISO 3231:1993 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 3233:1998 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
ISO 3233:1998/Cor 1:1999 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
ISO 3248:1998 Paints and varnishes - Determination of the effect of heat
ISO 3270:1984 Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing
ISO 3668:1998 Paints and varnishes - Visual comparison of the colour of paints
ISO 3679:2004 Determination of flash point - Rapid equilibrium closed cup method
ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method
ISO 4618:2006 Paints and varnishes - Terms and definitions
ISO 4623-1:2000 Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates
ISO 4623-2:2003 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
ISO 4623-2:2003/Cor 1:2005 Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates
ISO 4624:2002 Paints and varnishes - Pull-off test for adhesion
ISO 4628-1:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
ISO 4628-7:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method
ISO 4628-8:2005 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe
ISO 4628-10:2003 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
ISO 6270-1:1998 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation
ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6504-1:1983 Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints
ISO 6504-3:2006 Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate
ISO 6860:2006 Paints and varnishes - Bend test (conical mandrel)
ISO 7724-1:1984 Paints and varnishes - Colorimetry - Part 1: Principles
ISO 7724-2:1984 Paints and varnishes - Colorimetry - Part 2: Colour measurement
ISO 7724-3:1984 Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences
ISO 7783:2011 Paints and varnishes - Determination of water-vapour transmission properties - Cup method
ISO 7784-1:1997 Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method
ISO 7784-2:1997 Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method
ISO 7784-3:2000 Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method

 

v. 1, pt. 2. General test methods

ISO 8130-1:1992 Coating powders - Part 1: Determination of particle
size distribution by sieving
ISO 8130-2:1992 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method)
ISO 8130-3:1992 Coating powders - Part 3: Determination of density by liquid displacement pyknometer
ISO 8130-4:1992 Coating powders - Part 4: Calculation of lower explosion limit
ISO 8130-4:1992/Cor 1:1993 Coating powders - Part 4: Calculation of lower explosion limit
ISO 8130-5:1992 Coating powders - Part 5: Determination of flow properties of a powder/air mixture
ISO 8130-6:1992 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-6:1992/Amd 1:1998 Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-7:1992 Coating powders - Part 7: Determination of loss of mass on stoving
ISO 8130-8:1994 Coating powders - Part 8: Assessment of the storage stability of thermosetting powders
ISO 8130-9:1992 Coating powders - Part 9: Sampling
ISO 8130-10:1998 Coating powders - Part 10: Determination of deposition efficiency
ISO 8130-11:1997 Coating powders - Part 11: Inclined-plane flow test
ISO 8130-12:1998 Coating powders - Part 12: Determination of compatibility
ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
ISO 8130-14:2004 Coating powders - Part 14: Terminology
ISO 9038:2002 Test for sustained combustibility of liquids
ISO 9117-1:2009 Paints and varnishes - Drying tests - Determination of through-dry state and through-dry time
ISO 9117-2:2010 Paints and varnishes - Drying tests - Part 2: Pressure test for stackability
ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
ISO 9117-4:2012 Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder
ISO 9117-5:2012 Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test
ISO 9117-6:2012 Paints and varnishes - Drying tests - Part 6: Print-free test
ISO 9227:2012 Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing
ISO 10890:2010 Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation
ISO 11341:2004 Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation
ISO 11503:1995 Paints and varnishes - Determination of resistance to humidity (intermittent condensation)
ISO 11507:2007 Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water
ISO 11997-1:2005 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity
ISO 11997-2:2000 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
ISO 11998:2006 Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
ISO 12137:2011 Paints and varnishes - Determination of mar resistance
ISO 13076:2012 Paints and varnishes - Lighting and procedure for visual assessments of coatings
ISO 13736:2008 Determination of flash point - Abel closed-cup method
ISO 13803:2000 Paints and varnishes - Determination of reflection haze on paint films at 20°
ISO 14680-1:2000 Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method
ISO 14680-2:2000 Paints and varnishes - Determination of pigment content - Part 2: Ashing method
ISO 14680-3:2000 Paints and varnishes - Determination of pigment content - Part 3: Filtration method
ISO 15181-1:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides
ISO 15181-2:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
ISO 15181-3:2007 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
ISO 15181-4:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
ISO 15181-5:2008 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
ISO 15181-6:2012 Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
ISO 15184:1998 Paints and varnishes - Determination of film hardness by pencil test
ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes - Sampling
ISO 15710:2002 Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
ISO 15711:2003 Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water
ISO 15880:2000 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16773-1:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions
ISO 16773-2:2007 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data
ISO 16773-3:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Processing and analysis of data from dummy cells
ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
ISO 16862:2003 Paints and varnishes - Evaluation of sag resistance
ISO 17132:2007 Paints and varnishes - T-bend test
ISO 17872:2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO 20566:2005 Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash
ISO 20567-1:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 20567-2:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
ISO 21227-1:2003 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance
ISO 21227-2:2006 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test
ISO 21227-3:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe
ISO 21227-4:2008 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion
ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the
coating material, and calculation of the theoretical spreading rate
ISO 28199-1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels
ISO 28199-1:2009/Cor 1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels
ISO 28199-2:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
ISO 28199-3:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
ISO/TR 29662:2009 Petroleum products and other liquids - Guidance for flash point testing

 

v. 2. Raw materials

ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test
ISO 276:2002 Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
ISO 277:2002 Binders for paints and varnishes - Raw tung oil - Requirements and methods of test
ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 3681:1996 Binders for paints and varnishes - Determination of saponification value - Titrimetric method
ISO 4618:2006 Paints and varnishes - Terms and definitions
ISO 4619:1998 Driers for paints and varnishes
ISO 4625-1:2004 Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method
ISO 4625-2:2004 Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method
ISO 4626:1980 Volatile organic liquids - Determination of boiling range of organic solvents used as raw materials
ISO 4629:1996 Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method
ISO 4630-1:2004 Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method
ISO 4630-2:2004 Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method
ISO 6271-1:2004 Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method
ISO 6271-2:2004 Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method
ISO 6744-1:1999 Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test
ISO 6744-2:1999 Binders for paints and varnishes - Alkyd resins - Part 2:Determination of phthalic anhydride content
ISO 6744-3:1999 Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content
ISO 6744-4:1999 Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content
ISO 7142:2007 Binders for paints and varnishes - Epoxy resins - General methods of test
ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (corrected version)
ISO 8623:1997 Tall-oil fatty acids for paints and varnishes - Specifications and test methods
ISO 10283:2007 Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins
ISO 11668:1997 Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test
ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method
ISO 11890-2:2006 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method
ISO 11908:1996 Binders for paints and varnishes - Amino resins - General methods of test
ISO 11909:2007 Binders for paints and varnishes - Polyisocyanate resins - General methods of test
ISO 13632:2012 Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement
ISO 13885-1:2008 Binders for paints and varnishes - Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent
ISO 14446:1999 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
ISO 15234:1999 Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber
ISO 15715:2003 Binders for paints and varnishes - Determination of turbidity
ISO 15880:2000 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders
ISO 16805:2003 Binders for paints and varnishes - Determination of glass transition temperature
ISO 17895:2005 Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
ISO 19334:2010 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis

 

v. 3. Preparation and protection of steel substrates

ISO 4618:2006 Paints and varnishes - Terms and definitions
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (corrected version)
ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
ISO 8502-12:2003 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface - Stylus instrument procedure
ISO 8503-5:2003 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning
ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit
ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit
ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness
ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density
ISO 11125-5:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure
ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter
ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture
ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11126-1:1993/Cor 1:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11126-1:1993/Cor 2:1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification
ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag
ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag
ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag
ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag
ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
ISO 11126-7:1995/Cor 1:1999 Preparation of steel substrates before application /Cor 1:1999 of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand
ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet
ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution
ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density
ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test
ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement
ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides
ISO 12944-1:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction
ISO 12944-2:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments
ISO 12944-3:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations
ISO 12944-4:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surfaces and surface preparation
ISO 12944-5:2007 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems
ISO 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 12944-7:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work
ISO 12944-8:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO 15741:2001 Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracturestrength) of a coating - Part 1: Pull-off testing
ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracturestrength) of a coating - Part 2: Cross-cut testing and X-cut testing
ISO 19840:2004 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry film on rough surfaces
ISO 20340:2009 Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures
ISO 29601:2011 Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film

 

関連する「調べ方案内」

  • 国立国会図書館
  • 国立国会図書館オンライン
  • 国立国会図書館サーチ
  • 国立国会図書館デジタルコレクション
  • ひなぎく
  • レファレンス協同データベース
  • 本の万華鏡
  • 参考書誌研究